Tsymo Pet Feeder Manual Pdf (2024)

FAQs

How to reset automatic pet feeder? ›

To Set Time: 1. After powering feeder, the LCD will show a blinking 12 for time format setup. Use UP or DOWN buttons to scroll to select 12 hour or 24 hour time format. Press RIGHT button to set time.

Reset the feeder to factory settings, holding down the Add Pet ( ) button for 10 seconds (until the light starts alternating red / green and the lid opens and closes).

Feed Now Not Working/Jammed

Clean the feeder. Replace the batteries with four, new D-cell alkaline batteries. Important: Use only alkaline batteries in the feeder. Press the sleep button on the back of the feeder to resume the programmed feedings.

If the router or internet is not working, try resetting the router or contact your internet provider. Power cycle the feeder by turning off the power switch. Wait 10 seconds and turn the power switch back on. Check for other devices near the feeder that use the internet or other wireless signals (such as a microwave).

The buttons lock after 2 minutes of inactivity. The lock icon on the screen indicates that the buttons are locked. Press the center and up button at the same time to unlock the buttons.

Change time in increments of 15 minutes each week for four weeks. In week one instead of feeding at 5am/5pm provide a dog treat and go for a walk. Then feed at 5:15. The above chart is an example of how to gradually change your dog's feeding schedule.

Blue Blinking Fast Feeder is trying to connect to Wi-Fi or is offline. Blue Solid Feeder is connected to Wi-Fi with internet and fully operational. White Blinking Reboot mode which triggers the feeder to attempt to reconnect to your Wi-Fi without losing the programmed settings.

You can update your contact details by contacting the pet microchip registry your pet is enrolled with. Visit the company's website for information on updating your pet's record online, or to get the telephone number to call.

If your feeder has a flashing light indicating that it is offline, the feeder will continue to feed as previously scheduled if it has power. Verify home internet is working. If other wireless devices have also lost connection, consider resetting your router and/or contacting your internet service provider.

Why is the orange light flashing on my sure pet feeder? ›

Microchip Pet Feeders and Connect Pet Feeders:

Please note that when the lid remains open and the orange light flashes, this indicates that the feeder is in 'training mode'. Please press and hold the 'Fn'/training button for 10 seconds to deactivate the training mode.

How long to the batteries last? The Smart Feed is not meant to run on batteries alone. Batteries may be used as a backup in case of temporary loss of power, but batteries will not be sufficient as a regular form of power. At most, this will run for seven days on four D-Cell batteries.

The Smart Pet Feeder can be reset by pressing and holding the 'feed' button for 5 seconds until a sound is heard. A reset will erase all settings and data on the Smart Pet Feeder and return it to its original factory settings.

The Smart Pet Feeder can be reset by pressing and holding the 'feed' button for 5 seconds until a sound is heard. A reset will erase all settings and data on the Smart Pet Feeder and return it to its original factory settings.

Press and hold the Up button and the Down button for three seconds to reset the feeder to factory settings.

Press and hold reset button for 7 seconds until the blue light flashes to enter pairing mode. Geeni app should locate the smart feeder in no time. Use pet feeder in a dry indoor environment only.

The device has a lithium battery. If you do not need to use the device for an extended period of time, you must turn the device off yourself. At the same time, hold down the bowl reset button together with the manual food dispenser button for 5 seconds.